How to Apply N-Prove Peat
N-Prove peat has its own sticker in the formulation; a separate sticker is not needed. Apply N-Prove to pre-moistened seed, or add water while applying N-Prove, or mix N-Prove with cool, clean water and apply to seed as a slurry (refer to Table 1). Apply N-Prove when transferring seed from the bin to the truck, or from the truck to the tank or seed cart. N-Prove may also be applied directly to seed in the tank or seed cart. Make sure N-Prove is mixed thoroughly with the seed and that the seed is evenly coated. N-Prove peat inoculated seed should be planted within 48 hours.
| Table 1: Application Rates and Bare Seed Planting Windows | |||
 |
|||
| Crop | Seed Inoculated By One 4.8 lb Bag |
Approximate Water Volume |
Planting Window (Bare Seed) |
|
|||
| Pea | 50 bu (3000 lb) | 4.2 US Quarts | 48 hours |
| Lentil | 30 bu (1800 lb) | 2.7 US Quarts | 48 hours |
|
|||
- Once N-Prove is mixed in water, apply to seed within 6 hours.
- The planting window is the maximum time allowed between application and seeding.
- Application with other seed treatments is possible but may reduce the planting window. For up-to-date pesticide compatibility information and bare seed planting windows, please contact Philom Bios at 1-888-744-5662.
