Philom Bios Inc.
3935 Thatcher Avenue
Saskatoon, SK Canada S7R 1A3
1-888-744-5662
www.philombios.com

How to Apply & Application Rates

How To Apply
Inoculate seed on-farm by adding the contents of one 2.0 oz or one 10 oz container to the appropriate amount of water prior to or during seeding. For detailed information select a specific crop from the menu on the bottom left of this page.

Easy-to-use applicators are available for inoculating seed with JumpStart. JumpStart can also be applied during seeding using on-the-go treaters (refer to on-the-go treaters’ manual for application instructions). Applicators used previously for pesticides should be triple rinsed before being used for JumpStart application.

To divide the contents of a bottle of JumpStart, first dissolve the entire contents of the bottle in 0.5 US quarts water, mix thoroughly and divide the mixture into smaller quantities as desired. JumpStart in solution must be applied to the seed within 6 hours.

JumpStart can be used with nitrogen-fixing rhizobial inoculants. To mix JumpStart with a liquid inoculant, first dissolve the entire contents of the JumpStart wettable powder bottle in a small amount of the liquid inoculant for easier mixing. Pour the mixture into the remaining liquid Rhizobium inoculant and mix to dissolve. No additional water is required.

JumpStart can be applied to bare seed up to 60 days prior to planting depending on the crop treated. JumpStart can be used with most seed-applied treatments but the planting window may be reduced. For up-to-date pesticide compatibility and bare seed stability information, please contact Philom Bios at 1-888-744-5662.

Application Rates
For application rate information select the specific crop from the menu on the bottom left of this page.