Philom Bios Inc.
3935 Thatcher Avenue
Saskatoon, SK Canada S7R 1A3
1-888-744-5662
www.philombios.com

General Directions for TagTeam and N-Prove Liquid

  1. Shake well before using to ensure an even suspension. Some settling of the bacteria during storage is normal.
  2. Do not open the package until ready to use.

Continuous Application - On Seed

  1. Remove bag from the box. If using TagTeam liquid - pour the contents of the active powder into the bladder bag and mix well. If using an extender with TagTeam, add now.
  2. Attach dosing cap and tube to the bag.
  3. Hang the bag using the reinforced grommet with the dosing nozzle at the bottom.
  4. Calibrate the system to ensure the appropriate amount of inoculant is applied.

In-Furrow Application - N-Prove Pea/Lentil Only

  1. The inoculant is sensitive to chemical residues, therefore clean the tank and delivery system thoroughly before using to apply an inoculant.
  2. Remove spray tips and replace with appropriate flow regulator orifice discs and direct the solid stream behind the seed planting assembly in the furrow. DO NOT apply banded to the side, below or above the seed.
  3. Add the amount of liquid inoculant to the tank needed.
  4. Fill the spray with the appropriate amount of non-chlorinated water.
  5. No agitation is necessary as the addition of water will mix the product sufficiently and agitation is necessary to maintain suspension.

For more specific information on the application of N-Prove and TagTeam liquid select appropriate product.